DMP-1000+ DMP-3000 3D-MAC
 
 
 
 
 
 
 
Home > Customer > Training center >3D-MAC
 
Product simulation
 
 
Patient registration
 
 
Press registration button in customer management window and pop up the window of customer information registration
 
 
 
Enter name, sex, citizen registration number, birth date by solar/lunar calendar, height, weight and press confirm button, finishing registration
 
 
 
Enter the first 6 digits of citizen registration number. The first 6 digits of citizen registration number can automatically counts the birth date.
If you want to modify the customer information, press Search button of customer management window and pop up the window of customer information search. Select the customer in the pop-up window of customer information search, and press Modify button. The pop-up window of customer information search will be closed, and the customer information selected will be displayed on the screen. Press Modify button in the window of customer management, and pop up the window of customer information modification.
 
     
  After you change the customer information, press confirm button
     
 
Information on using the instrument
 
2-1 inducement of patient to take a seat
 
Induce the patient to take a seat to the side of the robot of 3-D MAC where the patient can sit comfortably. Be sure to have the patient to face the sensor part of the pulse wave form analyzer.
 
 
2-2 Preparation for measurement
 

The order of measurement is always from left to right, and Kwan, Chon and Chuck. Therefore, try to have patient to take a posture for measuring left part of the body. The patient's arms should not be twisted. enough to interrupt the patient's circulation of the blood in convenient posture. Hand trembling can be prevented by putting the right hand lightly on the left arm.

 
 
2-3 Pulse stream marking and robot stand-by
 
The robot in this system automatically searches the pulse waves and measures them. Mark the position which the sensor initially contacts with a pen, prepare for measurement, turning the sensor to the region.
 
 
2-4 Measurement using measurement menu
 

Get the robot ready for measurement by controling it with mouse or keyboard. The robot system automatically searches the pulse waves and measures them by the menu of start measurement on the measurement window.

If patient moves, coughs, talks or sneezes at this time, noises may happen, causing errors in the course of searching pulse waves. Therefore patients are advised not to move or talk.

 

 
 
2-5 Left hand measurement completed and measurement for right hand
 

When the measurement for left hand is completed, a message "measurement completed" will show up, and the robot will fully raise up the sensor. Patient should maintain the same posture as while measuring, and user should place the sensor in the middle, turning the robot head with both hands. And, pull out the patient's hand from the prop.

 
 
2-6 Get right hand ready and measurement
 

The process for measuring right hand is the same as measuring left hand. Mark pulse stream with a pen, place the sensor on the marked region, turning the robot head with two hands, and adjust the fine position by using key board or mouse, getting ready for measurement.

And then measure the pulse waves of right hand, using the menu, "start measurement". When the measurement is finished, user should place the sensor in the middle, turning the robot head with both hands. And, pull out the patient's hand from the prop.